M.2 M-key to 5-port SATA III 6Gbps Expansion Adapter Card
$48.00
- Product Code: ADP-M2M-5SA
- Availability: In Stock
ADP-M2M-5SA is a M.2 M Key to SATA Converter (5 x 6G Stacked Ports) using the PCIe 3.0 x2 channel with the theoretical speed of 6Gbps. Using the JMB585 chipset, the ADP-M2M-5SA can provide M.2 (PCIe Gen3 x2 bandwidth) to 5 Port SATA III 6Gb/s card solution. For the storage solution based on data transfer of multiple hard drives, the newly added FIS-based switching design can overcome the bottlenecks created by operating multiple SATA storage devices simultaneously. The data transmission rate of the JMB585 can achieve to 1700MB/s, which is the maximum transfer speed of PCIe Gen3 x2.
Features
- Compliant with M.2 Key M standard
- Supports up to two lane of PCI Express
- Transfer protocol: PCI Express x2
- Complies with PCI Express Base Specification Revision 3.1a
- Supports PCIe Link layer power saving mode
- Supports 5-SATA Port
- Each SATA Port transmit speeds up to 6Gbps
- Support command-based and FIS-based of Port Multiplier
- Complies with SATA Specification Revision 3.2
- Supports AHCI mode and IDE programming interface
- Supports Native Command Queue(NCQ)
- Supports SATA Link Power saving mode(partial and slumber)
- Supports SATA plug-in detection capable
- Supports drive power control and staggered spin-up
- Supports SATA Partial/Slumber power management state
- Plug-and-Play Supported, no additional software installation or settings required
- This card is only design for storage use only, can not boot any OS / System
Specifications
- Control Chipset: JMB585
- Host Bus Connector: M.2 M-Key
- Bus Standard: PCI Exrpess x2, Revision 3.1a
- Connector: 5 * SATA (7 pin, Data)
- Data Rate: Supports communication speeds of 6Gbps, 3Gbps, 1.5Gbps
Package Contents
- 1 x M.2 Key M to SATA 3.0 Expansion card
- 1 x Manual
- 5 x SATA Cable